View TL750L08CP_960475.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS
www.ti.com
SLVS017S - SEPTEMBER 1987 - REVISED AUGUST 2005
FEATURES
* * * * Very Low Dropout Voltage, Less Than 0.6 V at 150 mA Very Low Quiescent Current TTL- and CMOS-Compatible Enable on TL751L Series 60-V Load-Dump Protection
TL750L . . . D PACKAGE (TOP VIEW)
* * * * *
Reverse Transient Protection Down to -50 V Internal Thermal-Overload Protection Overvoltage Protection Internal Overcurrent-Limiting Circuitry Less Than 500-A Disable (TL751L Series)
TL750L . . . KTE PACKAGE (TOP VIEW)
TL750L . . . KC PACKAGE (TOP VIEW)
2 3 4
7 6 5
OUTPUT COMMON INPUT
COMMON
OUTPUT COMMON COMMON NC
1
8
INPUT COMMON COMMON NC
COMMON
OUTPUT COMMON INPUT
NC - No internal connection TL751L . . . D PACKAGE (TOP VIEW) TL751L . . . P PACKAGE (TOP VIEW) TL750L . . . LP PACKAGE (TO-92, TO-226AA) (TOP VIEW)
OUTPUT COMMON COMMON NC
1 2 3 4
8 7 6 5
INPUT COMMON COMMON ENABLE
OUTPUT NC NC NC
1 2 3 4
8 7 6 5
INPUT NC COMMON ENABLE
INPUT COMMON OUTPUT
NC - No internal connection
NC - No internal connection
DESCRIPTION/ORDERING INFORMATION
The TL750L and TL751L series of fixed-output voltage regulators offer 5-V, 8-V, 10-V, and 12-V options. The TL751L series also has an enable (ENABLE) input. When ENABLE is high, the regulator output is placed in the high-impedance state. This gives the designer complete control over power up, power down, or emergency shutdown. The TL750L and TL751L series are low-dropout positive-voltage regulators specifically designed for battery-powered systems. These devices incorporate overvoltage and current-limiting protection circuitry, along with internal reverse-battery protection circuitry to protect the devices and the regulated system. The series is fully protected against 60-V load-dump and reverse-battery conditions. Extremely low quiescent current during full-load conditions makes these devices ideal for standby power systems.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerFLEX is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright (c) 1987-2005, Texas Instruments Incorporated
TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS
SLVS017S - SEPTEMBER 1987 - REVISED AUGUST 2005
www.ti.com
ORDERING INFORMATION
TJ VO TYP AT 25C PACKAGE (1) PowerFLEXTM - KTE Reel of 2000 Tube of 75 SOIC - D 5V TO-226/TO-92 - LP TO-220 - KC 8V 0C to 125C SOIC - D TO-226/TO-92 - LP PDIP - P Reel of 2500 Tube of 75 Reel of 2500 Bulk of 1000 Reel of 2000 Tube of 50 Tube of 75 Reel of 2500 Bulk of 1000 Tube of 50 Tube of 75 10 V SOIC - D Reel of 2500 Tube of 75 Reel of 2500 TO-226/TO-92 - LP Bulk of 1000 Reel of 2000 Tube of 75 12 V SOIC - D Reel of 2500 Tube of 75 Reel of 2500 TO-226/TO-92 - LP (1) (2) Bulk of 1000 ORDERABLE PART NUMBER (2) TL750L05CKTER TL750L05CD TL750L05CDR TL751L05CD TL751L05CDR TL750L05CLP TL750L05CLPR TL750L05CKC TL750L08CD TL750L08CDR TL750L08CLP TL751L10CP TL750L10CD TL750L10CDR TL751L10CD TL751L10CDR TL750L10CLP TL750L10CLPR TL750L12CD TL750L12CDR TL751L12CD TL751L12CDR TL750L12CLP TOP-SIDE MARKING TL750L05C 50L05C 51L05C 750L05C TL750L05C 50L08C 750L08C TL751L10C 50L10C 51L10C 750L10C 50L12C 51L12C 750L12C
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. For the most current ordering information, see the Package Option Addendum at the end of this data sheet. DEVICE COMPONENT COUNT Transistors JFETs Diodes Resistors 20 2 5 16
2
www.ti.com
TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS
SLVS017S - SEPTEMBER 1987 - REVISED AUGUST 2005 (1)
Absolute Maximum Ratings
over operating junction temperature range (unless otherwise noted)
MIN Continuous input voltage Transient input voltage (2) Continuous reverse input voltage Transient reverse input voltage TJ Tstg (1) (2) Operating virtual junction temperature Lead temperature Storage temperature range 1,6 mm (1/16 in) for 10 s -65 t 100 ms TA = 25C MAX 26 60 -15 -50 150 260 150 UNIT V V V V C C C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The transient input voltage rating applies to the waveform shown in Figure 1.
Package Thermal Data (1)
PACKAGE PDIP (P) PowerFLEXTM (KTE) SOIC (D) TO-226/TO-92 (LP) TO-220 (KC) (1) BOARD High K, JESD 51-7 High K, JESD 51-5 High K, JESD 51-7 High K, JESD 51-7 High K, JESD 51-5 JC 57C/W 3C/W 39C/W 55C/W 3C/W JA 85C/W 23C/W 97C/W 140C/W 19C/W
Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability.
Recommended Operating Conditions
over recommended operating junction temperature range (unless otherwise noted)
MIN TL75xL05 VI Input voltage TL75xL08 TL75xL10 TL75xL12 VIH VIL (1) IO TJ (1) High-level ENABLE input voltage Low-level ENABLE input voltage Output current Operating virtual junction temperature TJ = 25C TJ = 0C to 125C TL75xLxx TL75xLxx TL75xLxx TL75xLxx TL75xLxxC 6 9 11 13 2 -0.3 -0.15 0 0 MAX 26 26 26 26 15 0.8 0.8 150 125 V V mA C V UNIT
The algebraic convention, in which the least positive (most negative) value is designated minimum, is used in this data sheet for ENABLE voltage levels and temperature only.
3
TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS
SLVS017S - SEPTEMBER 1987 - REVISED AUGUST 2005
www.ti.com
TL75xL05 Electrical Characteristics (1)
VI = 14 V, IO = 10 mA, TJ = 25C (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN Output voltage Input regulation voltage Ripple rejection Output regulation voltage Dropout voltage Output noise voltage Input bias current VI = 6 V to 26 V, IO = 0 to 150 mA VI = 9 V to 16 V VI = 6 V to 26 V VI = 8 V to 18 V, f = 120 Hz IO = 5 mA to 150 mA IO = 10 mA IO = 150 mA f = 10 Hz to 100 kHz IO = 150 mA VI = 6 V to 26 V, IO = 10 mA, TJ = 0C to 125C ENABLE 2 V (1) 500 10 1 12 2 0.5 mA 60 TJ = 25C TJ = 0C to 125C 4.8 4.75 5 6 65 20 50 0.2 0.6 TL750L05 TL751L05 TYP 5 MAX 5.2 5.25 10 30 V mV dB mV V V UNIT
Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-F capacitor across the input and a 10-F capacitor, with equivalent series resistance of less than 0.4 , across the output.
TL75xL08 Electrical Characteristics (1)
VI = 14 V, IO = 10 mA, TJ = 25C (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN Output voltage Input regulation voltage Ripple rejection Output regulation voltage Dropout voltage Output noise voltage Input bias current VI = 9 V to 26 V, IO = 0 to 150 mA VI = 10 V to 17 V VI = 9 V to 26 V VI = 11 V to 21 V, f = 120 Hz IO = 5 mA to 150 mA IO = 10 mA IO = 150 mA f = 10 Hz to 100 kHz IO = 150 mA VI = 9 V to 26 V, IO = 10 mA, TJ = 0C to 125C ENABLE 2 V (1) 500 10 1 12 2 0.5 mA 60 TJ = 25C TJ = 0C to 125C 7.68 7.6 10 25 65 40 80 0.2 0.6 TL750L08 TL751L08 TYP 8 MAX 8.32 8.4 20 50 V mV dB mV V V UNIT
Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-F capacitor across the input and a 10-F capacitor, with equivalent series resistance of less than 0.4 , across the output.
4
www.ti.com
TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS
SLVS017S - SEPTEMBER 1987 - REVISED AUGUST 2005 (1)
TL75xL10 Electrical Characteristics
VI = 14 V, IO = 10 mA, TJ = 25C (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN Output voltage Input regulation voltage Ripple rejection Output regulation voltage Dropout voltage Output noise voltage Input bias current VI = 11 V to 26 V, IO = 0 to 150 mA VI = 12 V to 19 V VI = 11 V to 26 V VI = 12 V to 22 V, f = 120 Hz IO = 5 mA to 150 mA IO = 10 mA IO = 150 mA f = 10 Hz to 100 kHz IO = 150 mA VI = 11 V to 26 V, IO = 10 mA, TJ = 0C to 125C ENABLE 2 V (1) 700 10 1 12 2 0.5 mA 60 TJ = 25C TJ = 0C to 125C 9.6 9.5 10 30 65 50 100 0.2 0.6 TL750L10 TL751L10 TYP 10 MAX 10.4 10.5 25 60 V mV dB mV V V UNIT
Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-F capacitor across the input and a 10-F capacitor, with equivalent series resistance of less than 0.4 , across the output.
TL75xL12 Electrical Characteristics (1)
VI = 14 V, IO = 10 mA, TJ = 25C (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN Output voltage Input regulation voltage Ripple rejection Output regulation voltage Dropout voltage Output noise voltage Input bias current VI = 13 V to 26 V, IO = 0 to 150 mA VI = 14 V to 19 V VI = 13 V to 26 V VI = 13 V to 23 V, f = 120 Hz IO = 5 mA to 150 mA IO = 10 mA IO = 150 mA f = 10 Hz to 100 kHz IO = 150 mA VI = 13 V to 26 V, IO = 10 mA, TJ = 0C to 125C ENABLE 2 V (1) 700 10 1 12 2 0.5 mA 50 TJ = 25C TJ = 0C to 125C 11.52 11.4 15 20 55 50 120 0.2 0.6 TL750L12 TL751L12 TYP 12 MAX 12.48 12.6 30 40 V mV dB mV V V UNIT
Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-F capacitor across the input and a 10-F capacitor, with equivalent series resistance of less than 0.4 , across the output.
PARAMETER MEASUREMENT INFORMATION
The TL750L, TL751L series are low-dropout regulators. This means that capacitance loading is important to the performance of the regulator because it is a vital part of the control loop. The capacitor value and its equivalent series resistance (ESR) both affect the control loop and must be defined for the load range and temperature range. Figure 1 shows the recommended range of ESR for a given load with a 10-F capacitor on the output.
5
TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS
SLVS017S - SEPTEMBER 1987 - REVISED AUGUST 2005
www.ti.com
TYPICAL CHARACTERISTICS
TL750L05 EQUIVALENT SERIES RESISTANCE vs LOAD CURRENT
1.0 ESR - Equivalent Series Resistance - 0.9 0.8 Potential Instability Region 0.7 0.6 0.5 0.4 0.3 Region of Best Stability 0.2 0.1 0.024 0 CL = 10-F Tantalum Capacitor TA = - 40C to 125C V i - Transient Input Voltage - V 50 60 TA = 25C VI = 14 V + 46e(-t/0.230) for t 5 ms
TRANSIENT INPUT VOLTAGE vs TIME
40
30
20
10
0
Potential Instability Region 10 80 120 IL - Load Current - mA
0 150 0 100 200 300 400 500 600 t - Time - ms
Figure 1. TL750L05 INPUT CURRENT vs INPUT VOLTAGE
40 35 50 30 II - Input Current - mA II - Input Current - mA 40 25 20 15 10 10 5 0 0 1 2 3 4 5 6 VI - Input Voltage - V 0 0 2 4 60
30
20
Figure 3.
6

tr = 1 ms
Figure 2. TL750L12 INPUT CURRENT vs INPUT VOLTAGE
6
8
10
12
14
VI - Input Voltage - V
Figure 4.
PACKAGE OPTION ADDENDUM
www.ti.com
1-Aug-2005
PACKAGING INFORMATION
Orderable Device 5962-9166901Q2A 5962-9166901QPA TL750L05CD TL750L05CDE4 TL750L05CDR TL750L05CDRE4 TL750L05CKC TL750L05CKTER TL750L05CLP TL750L05CLPM TL750L05CLPR TL750L05CP TL750L05QD TL750L05QDR TL750L05QKC TL750L05QLP TL750L05QP TL750L08CD TL750L08CDE4 TL750L08CDR TL750L08CDRE4 TL750L08CKC TL750L08CLP TL750L08CP TL750L08QD TL750L08QDR TL750L08QKC TL750L08QLP TL750L10CD TL750L10CDE4 TL750L10CDR TL750L10CDRE4 TL750L10CKC TL750L10CLP Status (1) OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE Package Type LCCC CDIP SOIC SOIC SOIC SOIC TO-220 PFM TO-92 TO-92 TO-92 PDIP SOIC SOIC TO-220 TO-92 PDIP SOIC SOIC SOIC SOIC TO-220 TO-92 PDIP SOIC SOIC TO-220 TO-92 SOIC SOIC SOIC SOIC TO-220 TO-92 Package Drawing FK JG D D D D KC KTE LP LP LP P D D KC LP P D D D D KC LP P D D KC LP D D D D KC LP Pins Package Eco Plan (2) Qty 20 8 8 8 8 8 3 3 3 3 3 8 8 8 3 3 8 8 8 8 8 3 3 8 8 8 3 3 8 8 8 8 3 3 1000 75 75 1000 75 75 2000 75 75 TBD TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Lead/Ball Finish Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU SNPB CU SNPB CU SNPB Call TI CU SNPB Call TI Call TI Call TI Call TI Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU SNPB Call TI Call TI Call TI Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU SNPB MSL Peak Temp (3) Call TI Call TI Level-2-260C-1YEAR Level-2-260C-1YEAR Level-2-260C-1YEAR Level-2-260C-1YEAR Level-NC-NC-NC Level-1-220C-UNLIM Level-NC-NC-NC Call TI Level-NC-NC-NC Call TI Call TI Call TI Call TI Call TI Call TI Level-2-260C-1YEAR Level-2-260C-1YEAR Level-2-260C-1YEAR Level-2-260C-1YEAR Call TI Level-NC-NC-NC Call TI Call TI Call TI Call TI Call TI Level-2-260C-1YEAR Level-2-260C-1YEAR Level-2-260C-1YEAR Level-2-260C-1YEAR Call TI Level-NC-NC-NC
2500 Green (RoHS & no Sb/Br) 2500 Green (RoHS & no Sb/Br) 50 2000 1000 TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
2500 Green (RoHS & no Sb/Br) 2500 Green (RoHS & no Sb/Br) TBD TBD TBD TBD TBD TBD TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
2500 Green (RoHS & no Sb/Br) 2500 Green (RoHS & no Sb/Br) TBD TBD
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
1-Aug-2005
Orderable Device TL750L10CLPR TL750L10CP TL750L10QD TL750L10QDR TL750L10QKC TL750L10QLP TL750L10QP TL750L12CD TL750L12CDE4 TL750L12CDR TL750L12CDRE4 TL750L12CKC TL750L12CLP TL750L12CP TL750L12QD TL750L12QDR TL750L12QKC TL750L12QLP TL750L12QP TL751L05CD TL751L05CDE4 TL751L05CDR TL751L05CDRE4 TL751L05CP TL751L05MFKB TL751L05MJGB TL751L05QD TL751L05QDR TL751L05QP TL751L08CD TL751L08CP TL751L08QD TL751L08QDR TL751L10CD TL751L10CDE4 TL751L10CDR
Status (1) ACTIVE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE
Package Type TO-92 PDIP SOIC SOIC TO-220 TO-92 PDIP SOIC SOIC SOIC SOIC TO-220 TO-92 PDIP SOIC SOIC TO-220 TO-92 SOIC SOIC SOIC SOIC SOIC PDIP LCCC CDIP SOIC SOIC PDIP SOIC PDIP SOIC SOIC SOIC SOIC SOIC
Package Drawing LP P D D KC LP P D D D D KC LP P D D KC LP D D D D D P FK JG D D P D P D D D D D
Pins Package Eco Plan (2) Qty 3 8 8 8 3 3 8 8 8 8 8 3 3 8 8 8 3 3 8 8 8 8 8 8 20 8 8 8 8 8 8 8 8 8 8 8 75 75 75 75 1000 75 75 2000 TBD TBD TBD TBD TBD TBD TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
Lead/Ball Finish CU SNPB Call TI Call TI Call TI Call TI Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU SNPB Call TI Call TI Call TI Call TI Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU
MSL Peak Temp (3) Level-NC-NC-NC Call TI Call TI Call TI Call TI Call TI Call TI Level-2-260C-1YEAR Level-2-260C-1YEAR Level-2-260C-1YEAR Level-2-260C-1YEAR Call TI Level-NC-NC-NC Call TI Call TI Call TI Call TI Call TI Call TI Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI Level-2-260C-1YEAR Level-2-260C-1YEAR Level-2-260C-1YEAR
2500 Green (RoHS & no Sb/Br) 2500 Green (RoHS & no Sb/Br) TBD TBD TBD TBD TBD TBD TBD TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
2500 Green (RoHS & no Sb/Br) 2500 Green (RoHS & no Sb/Br) TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
2500 Green (RoHS & no Sb/Br)
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
1-Aug-2005
Orderable Device TL751L10CDRE4 TL751L10CP TL751L10CPE4 TL751L10QD TL751L10QP TL751L12CD TL751L12CDE4 TL751L12CDR TL751L12CDRE4 TL751L12CP TL751L12MFKB TL751L12MJGB TL751L12QD TL751L12QDR TL751L12QP
(1)
Status (1) ACTIVE ACTIVE ACTIVE OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE
Package Type SOIC PDIP PDIP SOIC PDIP SOIC SOIC SOIC SOIC PDIP LCCC CDIP SOIC SOIC PDIP
Package Drawing D P P D P D D D D P FK JG D D P
Pins Package Eco Plan (2) Qty 8 8 8 8 8 8 8 8 8 8 20 8 8 8 8 75 75 2500 Green (RoHS & no Sb/Br) 50 50 Pb-Free (RoHS) Pb-Free (RoHS) TBD TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
Lead/Ball Finish CU NIPDAU CU NIPDAU CU NIPDAU Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI Call TI Call TI Call TI Call TI Call TI
MSL Peak Temp (3) Level-2-260C-1YEAR Level-NC-NC-NC Level-NC-NC-NC Call TI Call TI Level-2-260C-1YEAR Level-2-260C-1YEAR Level-2-260C-1YEAR Level-2-260C-1YEAR Call TI Call TI Call TI Call TI Call TI Call TI
2500 Green (RoHS & no Sb/Br) 2500 Green (RoHS & no Sb/Br) TBD TBD TBD TBD TBD TBD
The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 3
MECHANICAL DATA
MCER001A - JANUARY 1995 - REVISED JANUARY 1997
JG (R-GDIP-T8)
0.400 (10,16) 0.355 (9,00) 8 5
CERAMIC DUAL-IN-LINE
0.280 (7,11) 0.245 (6,22)
1
4 0.065 (1,65) 0.045 (1,14)
0.063 (1,60) 0.015 (0,38)
0.020 (0,51) MIN
0.310 (7,87) 0.290 (7,37)
0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN
0.023 (0,58) 0.015 (0,38) 0.100 (2,54) 0.014 (0,36) 0.008 (0,20)
0-15
4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
MECHANICAL DATA
MLCC006B - OCTOBER 1996
FK (S-CQCC-N**)
28 TERMINAL SHOWN
LEADLESS CERAMIC CHIP CARRIER
18
17
16
15
14
13
12
NO. OF TERMINALS ** 11 10 28 9 8 7 6 68 5 84 44 52 20
A MIN 0.342 (8,69) 0.442 (11,23) 0.640 (16,26) 0.739 (18,78) 0.938 (23,83) 1.141 (28,99) MAX 0.358 (9,09) 0.458 (11,63) 0.660 (16,76) 0.761 (19,32) 0.962 (24,43) 1.165 (29,59) MIN 0.307 (7,80) 0.406 (10,31) 0.495 (12,58) 0.495 (12,58) 0.850 (21,6) 1.047 (26,6)
B MAX 0.358 (9,09) 0.458 (11,63) 0.560 (14,22) 0.560 (14,22) 0.858 (21,8) 1.063 (27,0)
19 20 21 B SQ 22 A SQ 23 24 25
26
27
28
1
2
3
4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25)
0.020 (0,51) 0.010 (0,25)
0.055 (1,40) 0.045 (1,14)
0.045 (1,14) 0.035 (0,89)
0.028 (0,71) 0.022 (0,54) 0.050 (1,27)
0.045 (1,14) 0.035 (0,89)
4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
MECHANICAL DATA
MPDI001A - JANUARY 1995 - REVISED JUNE 1999
P (R-PDIP-T8)
0.400 (10,60) 0.355 (9,02) 8 5
PLASTIC DUAL-IN-LINE
0.260 (6,60) 0.240 (6,10)
1
4 0.070 (1,78) MAX 0.325 (8,26) 0.300 (7,62) 0.015 (0,38) 0.200 (5,08) MAX Seating Plane 0.125 (3,18) MIN 0.010 (0,25) NOM Gage Plane
0.020 (0,51) MIN
0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0.010 (0,25) M
0.430 (10,92) MAX
4040082/D 05/98 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
MECHANICAL DATA
MPFM001E - OCTOBER 1994 - REVISED JANUARY 2001
KTE (R-PSFM-G3)
0.375 (9,52) 0.365 (9,27) 0.360 (9,14) 0.350 (8,89) 0.220 (5,59) NOM
PowerFLEXTM PLASTIC FLANGE-MOUNT
0.080 (2,03) 0.070 (1,78) 0.050 (1,27) 0.040 (1,02) 0.010 (0,25) NOM
0.295 (7,49) NOM 0.420 (10,67) 0.410 (10,41)
0.360 (9,14) 0.350 (8,89) 0.320 (8,13) 0.310 (7,87)
Thermal Tab (See Note C)
1
3 0.025 (0,63) 0.031 (0,79) Seating Plane 0.004 (0,10) 0.005 (0,13) 0.001 (0,03)
0.100 (2,54) 0.200 (5,08)
0.010 (0,25) M
0.010 (0,25) NOM Gage Plane
0.041 (1,04) 0.031 (0,79)
3- 6
0.010 (0,25) 4073375/F 12/00 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. The center lead is in electrical contact with the thermal tab. Dimensions do not include mold protrusions, not to exceed 0.006 (0,15). Falls within JEDEC MO-169
PowerFLEX is a trademark of Texas Instruments.
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
1
MECHANICAL DATA
MSOT002A - OCTOBER 1994 - REVISED NOVEMBER 2001
LP (O-PBCY-W3)
0.205 (5,21) 0.175 (4,44)
PLASTIC CYLINDRICAL PACKAGE
0.165 (4,19) 0.125 (3,17)
DIA
0.210 (5,34) 0.170 (4,32) Seating Plane 0.157 (4,00) MAX 0.050 (1,27) C
0.500 (12,70) MIN
0.104 (2,65) FORMED LEAD OPTION
0.022 (0,56) 0.016 (0,41) STRAIGHT LEAD OPTION D
0.016 (0,41) 0.014 (0,35)
0.135 (3,43) MIN 0.105 (2,67) 0.095 (2,41) 0.055 (1,40) 0.045 (1,14)
1
2
3
0.105 (2,67) 0.080 (2,03) NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Lead dimensions are not controlled within this area
0.105 (2,67) 0.080 (2,03)
4040001-2 /C 10/01
D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92) E. Shipping Method: Straight lead option available in bulk pack only. Formed lead option available in tape & reel or ammo pack.
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
1
MECHANICAL DATA
MSOT002A - OCTOBER 1994 - REVISED NOVEMBER 2001
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.539 (13,70) 0.460 (11,70)
1.260 (32,00) 0.905 (23,00)
0.650 (16,50) 0.610 (15,50)
0.098 (2,50)
0.020 (0,50) MIN
0.384 (9,75) 0.335 (8,50)
0.433 (11,00) 0.335 (8,50)
0.748 (19,00) 0.217 (5,50)
0.748 (19,00) 0.689 (17,50)
0.114 (2,90) 0.094 (2,40) 0.114 (2,90) 0.094 (2,40) 0.266 (6,75) 0.234 (5,95) 0.512 (13,00) 0.488 (12,40) 0.169 (4,30) 0.146 (3,70) DIA
TAPE & REEL 4040001-3 /C 10/01 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Tape and Reel information for the Format Lead Option package.
2
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless
WWW..COM
Copyright (c) Each Manufacturing Company. All Datasheets cannot be modified without permission.
This datasheet has been download from : www..com
100% Free DataSheet Search Site. Free Download. No Register. Fast Search System. www..com

▲Up To Search▲

Price & Availability of TL750L08CP

	To Download TL750L08CP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .